Spring Branch Plant - Executive Summary
Executive Summary for the City of Houston Spring Branch Plant |
1. Accidental Release Prevention and Emergency Response Policies
Spring Branch Plant is strongly committed to employee, public and environmental safety. This commitment is demonstrated by a comprehensive accidental release prevention program that covers areas such as design, installation, operating procedures, maintenance, and employee training associated with the processes at its facility. It is policy to implement appropriate controls to prevent possible releases of regulated substances.
2. The Stationary Source and the Regulated Substances Handled
The facility's primary activities encompass treating ground water. Spring Branch Plant has one regulated substance present at its facility. This substance is chlorine, which is used for disinfection. The maximum inventory of chlorine at the facility is 4,000 pounds.
3. The Worst Case Release Scenario and the Alternative Release Scenario, including Administrative Controls
and Mitigation Measures to Limit the Distances for Each Reported Scenario
To perform the required offsite consequence analysis for its facility, Spring Branch Plant has used EPA's RMP*Comp(TM). The following paragraphs provide details of the chosen scenarios.
The worst-case release scenario submitted for Program 2 toxic substances as a class involves a catastrophic release from the chlorine room. This scenario involves the release of 2,000 pounds of chlorine in a gaseous form over a 10-minute period. Passive mitigation systems, such as an enclosure, are also taken into account to calculate the scenario. This mitigation system has the effect of reducing the affected area by 45%. At Class F atmospheric stability and 1.5 m/s windspeed, the maximum distance of 0.9 miles is obtained, corresponding to a toxic endpoint of 0.0087 mg/L.
The alternative release scenario involves a valve failure release from the chlorine room of 630 pounds of chlorine in a gaseous form. The release lasts fo
r a period of 60 minutes. Passive mitigation controls, such as an enclosure, are taken into account to calculate the scenario, having the effect of reducing the affected area by 45%. Under neutral weather conditions, the maximum distance to the toxic endpoint of 0.0087 mg/L of chlorine is 0.1 miles.
4. The General Accidental Release Prevention Program and the Chemical-Specific Prevention Steps
Spring Branch Plant has taken all the necessary steps to comply with the accidental release prevention requirements set out under 40 CFR part 68 of the EPA. The following sections briefly describe the elements of the release prevention program that is in place at the stationary source.
Process Safety Information
Spring Branch Plant maintains a detailed record of safety information that describes the chemical hazards, operating parameters, and equipment designs associated with all processes.
Process Hazard Analysis
Spring Branch Plant conducts comprehensive studies to ensure that hazards as
sociated with its processes are identified and controlled efficiently. The methodology used to carry out these analyses is inspection of the plant to identify deficiencies throughout the system. The studies are undertaken by a team of qualified personnel with expertise in engineering and process operations and are revalidated routinely. Any findings related to the hazard analysis are addressed in a timely manner.
For the purposes of safely conducting activities within the facility's covered processes, Spring Branch Plant maintains written operating procedures. These procedures address various modes of operation such as initial startup, normal operations, temporary operations, emergency shutdown, emergency operations, and normal shutdown. The information is regularly reviewed and is readily accessible to operators involved in the processes.
Spring Branch Plant has a comprehensive training program in place to ensure that employees who are responsible
for processes are competent in the operating procedures associated with these processes. Refresher training is provided as needed.
Spring Branch Plant carries out highly documented maintenance checks on process equipment to ensure proper operations. Process equipment examined by these checks includes among others: pressure vessels, storage tanks, piping systems, relief and vent systems, emergency shutdown systems, controls, and pumps. Maintenance operations are carried out by qualified personnel with previous training in maintenance practices. Furthermore, these personnel are offered specialized training as needed. Any equipment deficiencies identified by the maintenance checks are corrected in a safe and timely manner.
Management of Change
Written procedures are in place at Spring Branch Plant to manage changes in process chemicals, technology, equipment and procedures. The most recent review/revision of maintenance procedures was performed on May 28, 1999
. Process operators, maintenance personnel, or any other employee whose job tasks are affected by a modification in process conditions are promptly made aware of and offered training to deal with the modification.
Pre-startup safety reviews related to new processes and to modifications in established processes are conducted at Spring Branch Plant. These reviews are conducted to confirm that construction, equipment, operating, and maintenance procedures are suitable for safe startup prior to placing equipment into operation.
Spring Branch Plant conducts audits on a regular basis to determine whether the provisions set out under the RMP rule are being implemented. These audits are carried out at least every three years and any corrective actions required as a result of the audits are undertaken in a safe and prompt manner.
Spring Branch Plant promptly investigates any incident that has resulted in, or could reasonably resul
t in, a catastrophic release of a regulated substance. These investigations are undertaken to identify the situation leading to the incident as well as any corrective actions to prevent the release from reoccurring. All reports are retained for a minimum of five years.
Spring Branch Plant truly believes that process safety management and accident prevention is a team effort. Employees are strongly encouraged to express their views concerning accident prevention issues and to recommend improvements. In addition, employees have access to all information created as part of the facility's implementation of the RMP rule, including information resulting from process hazard analyses in particular.
On occasion, Spring Branch Plant hires contractors to conduct specialized maintenance and construction activities. Prior to selecting a contractor, a thorough evaluation of safety performance of the contractor is carried out. Spring Branch Plant has a stric
t policy of informing the contractors of known potential hazards related to the contractor's work and the processes. Contractors are also informed of all the procedures for emergency response should an accidental release of a regulated substance occur.
5. Five-year Accident History
Spring Branch Plant has had an excellent record of preventing accidental releases over the last five years. Due to its stringent release prevention policies, there have been no accidental releases during this period.
6. Emergency Response Plan
Spring Branch Plant carries a written emergency response plan to deal with accidental releases of hazardous materials. The plan includes all aspects of emergency response including adequate first aid and medical treatment, evacuations, and notification of local emergency response agencies and the public.
To ensure proper functioning, the facility's emergency response equipment is regularly inspected and serviced. In addition, the plan is promptly updated to re
flect any pertinent changes taking place within Spring Branch Plant's processes that would require a modified emergency response.