Falcon Safety Products, Inc. - Executive Summary |
|
General Executive Summary for Chemical, Manufacturing and Oil Refining Facilities 1. Accidental Release Prevention and Emergency Response Policies We at Falcon Safety Products, Inc. are strongly committed to employee, public and environmental safety. This commitment is demonstrated by our comprehensive accidental release prevention program that covers areas such as design, installation, operating procedures, maintenance, and employee training associated with the processes at our facility. It is our policy to implement appropriate controls to prevent possible releases of regulated substances. 2. The Stationary Source and the Regulated Substances Handled We have a regulated substance present at our facility. The substance is Difluoroethane [Ethane, 1,1-difluoro-] used as an aerosol propellant. The maximum inventory of Difluoroethane [Ethane, 1,1-difluoro-] at our facility is 191,000.00 lb. 3. The Worst Case Release Scenario(s) and the Alternative Release Scenario(s), includ ing administrative controls and mitigation measures to limit the distances for each reported scenario To perform the required offsite consequence analysis for our facility, we have used the EPA's OCA Guidance Reference Tables or Equations. The following paragraphs provide details of the chosen scenarios. The worst case release scenario submitted for Program 2 and 3 flammable substances as a class involves a catastrophic release from 152a. In this scenario 66,000 lb. of Diflouroethane [Ethane, 1,1 diflouro-] is released. It is assumed that the entire quantity is released as a vapor, which finds an ignition source, with 10 percent of the released quantity participating in a vapor cloud explosion. Under worst case weather conditions, the calculated distance of 0.20 miles is obtained corresponding to an endpoint of 1 psi overpressure. One alternative release scenario submitted for Program 3 flammable substances involves a release from 152a. The release is assumed to result in a Vap or Cloud Explosion. The scenario involves the release of 66,000 lb. of Diflouroethane in 10 minutes. Under neutral weather conditions, the maximum distance to the flammable endpoint of 1 psi overpressure is 0.11 miles. 4. The General Accidental Release Prevention Program and the Chemical-Specific Prevention Steps Our facility has taken all the necessary steps to comply with the accidental release prevention requirements set out under 40 CFR part 68 of the EPA. The following sections briefly describe the elements of the release prevention program that is in place at our stationary source. Process Safety Information Falcon Safety Products, Inc. maintains a detailed record of safety information that describes the chemical hazards, operating parameters and equipment designs associated with all processes. Process Hazard Analysis Our facility conducts comprehensive studies to ensure that hazards associated with our processes are identified and controlled efficiently. The methodolo gy used to carry out these analyses is HAZOP. The studies are undertaken by a team of qualified personnel with expertise in engineering and process operations and are revalidated at a regular interval of five years. Any findings related to the hazard analysis are addressed in a timely manner. The most recent PHA/update was performed on 04/06/1999. Operating Procedures For the purposes of safely conducting activities within our covered processes, Falcon Safety Products, Inc. maintains written operating procedures. These procedures address various modes of operation such as initial startup, normal operations, temporary operations, emergency shutdown, emergency operations, normal shutdown and startup after a turnaround. The information is regularly reviewed and is readily accessible to operators involved in the processes. Training Falcon Safety Products, Inc. has a comprehensive training program in place to ensure that employees who are operating processes are competent in the oper ating procedures associated with these processes. Refresher training is provided at least every three years and more frequently as needed. Mechanical Integrity Falcon Safety Products, Inc. carries out highly documented maintenance checks on process equipment to ensure proper operations. Process equipment examined by these checks includes among others; pressure vessels, storage tanks, piping systems, relief and vent systems, emergency shutdown systems, controls and pumps. Maintenance operations are carried out by qualified personnel with previous training in maintenance practices. Furthermore, these personnel are offered specialized training as needed. Any equipment deficiencies identified by the maintenance checks are corrected in a safe and timely manner. Management of Change Written procedures are in place at Falcon Safety Products, Inc. to manage changes in process chemicals, technology, equipment and procedures. The most recent review/revision of maintenance procedures was performed on 5/28/99. Process operators, maintenance personnel or any other employee whose job tasks are affected by a modification in process conditions are promptly made aware of and offered training to deal with the modification. Pre-startup Reviews Pre-start up safety reviews related to new processes and to modifications in established processes are conducted as a regular practice at Falcon Safety Products, Inc.. The most recent review was performed on 5/28/99. These reviews are conducted to confirm that construction, equipment, operating and maintenance procedures are suitable for safe startup prior to placing equipment into operation. Compliance Audits Falcon Safety Products, Inc. conducts audits on a regular basis to determine whether the provisions set out under the RMP rule are being implemented. The most recent comliance audit was conducted on 5/28/99. These audits are carried out at least every 3 years and any corrective actions required as a result of the audits are undertaken in a safe and prompt manner. Incident Investigation Falcon Safety Products, Inc. promptly investigates any incident that has resulted in, or could reasonably result in a catastrophic release of a regulated substance. These investigations are undertaken to identify the situation leading to the incident as well as any corrective actions to prevent the release from reoccurring. All reports are retained for a minimum of 5 years. Employee Participation Falcon Safety Products, Inc. truly believes that process safety management and accident prevention is a team effort. Company employees are strongly encouraged to express their views concerning accident prevention issues and to recommend improvements. In addition, our employees have access to all information created as part of the facility's implementation of the RMP rule, including information resulting from process hazard analyses in particular. Contractors On occasion, our company hires contractors to conduct specialized m aintenance and construction activities. Prior to selecting a contractor, a thorough evaluation of safety performance of the contractor is carried out. Falcon Safety Products, Inc. has a strict policy of informing the contractors of known potential hazards related the contractor's work and the processes. Contractors are also informed of all the procedures for emergency response should an accidental release of a regulated substance occur. 5. Five-year Accident History Falcon Safety Products, Inc. has had an excellent record of preventing accidental releases over the last 5 years. Due to our stringent release prevention policies, there has been no accidental release during this period. 6. Emergency Response Plan Falcon Safety Products, Inc. carries a written emergency response plan to deal with accidental releases of hazardous materials. The plan includes all aspects of emergency response including adequate first aid and medical treatment, evacuations, notification of local emer gency response agencies and the public, as well as post-incident decontamination of affected areas. To ensure proper functioning, our emergency response equipment is regularly inspected and serviced. In addition, the plan is promptly updated to reflect any pertinent changes taking place within our processes that would require a modified emergency response. 7. Planned Changes to Improve Safety Several developments and findings have resulted from the implementation of the various elements of our accidental release prevention program. Training of operators, safety inspections, process hazard analysis, emergency shutdown systems, and maintenance of equipment are some of the major steps we want to take to improve safety at our facility. These changes are currently being implemented |