Yocum Service Inc. - Executive Summary

| Accident History | Chemicals | Emergency Response | Registration | Source | Executive Summary |

             Risk Management Plan (RMP) - Ammonia 
                      Executive Summary 
                     Yocum Service, Inc. 
                     Mound City, Missouri 
 
 
 1. Accidental Release Prevention and Emergency Response Policies 
We at Yocum Service, Inc. in Mound City are strongly committed to employee, public, and 
environmental safety.  This commitment is an inherent part of our comprehensive accidental release 
prevention program that covers areas such as design, installation, operating procedures, maintenance, 
and employee training associated with the processes at our facility.  It is our policy to implement 
appropriate controls to prevent possible releases of regulated substances.  If such a release does 
occur, our trained emergency response personnel are at hand to control and mitigate the effects of 
the release.  We also coordinate our response efforts with the Mound City Fire Department, which 
provid 
es additional emergency response expertise. 
 
 2. Stationary Source and Regulated Substances Handled 
Our facility's primary activities include support services for crop production.  We have anhydrous 
ammonia stored in a 11,500-gallon tank at our facility in Mound City (Figure 1).  The maximum 
amount stored is 9,775 gallons (50,302.15 pounds) at the maximum fill capacity of 85%. 
 
 3. Worst Case Release and Alternative Release Scenarios 
We utilized RMP PRO for the worst case and alternate case scenarios of the required offsite 
consequence analysis for our facility.  The following details these scenarios. 
 
The worst case release scenario involves a catastrophic release of the entire contents of the 
anhydrous ammonia storage tank (50,302.15 pounds) in gaseous form over a 10-minute period.  At 
Class F atmospheric stability, 1.5 m/s wind speed, and urban topography, the maximum distance to 
a toxic endpoint of 0.14 mg/L is 3.4 miles (Figure 2).  The estimated population within a 3.4-mile 
rad 
ius of this facility is 2,200. 
 
The alternative release scenario involves a release from an anhydrous ammonia product line.  The 
scenario involves the release of 7,616.42 pounds of ammonia in a gaseous form over a period of 30 
minutes.  Under neutral weather conditions, the maximum distance to the toxic endpoint of 0.14 
mg/L of ammonia is 0.31 mile (Figure 3).  The estimated population within a 0.31-mile radius of the 
facility is 400. 
 
 4. General Accidental Release Prevention Program 
Our facility has taken all the necessary steps to comply with the EPA's accidental release prevention 
requirements as set forth in 40 CFR part 68.  The following sections briefly describe the elements 
of the release prevention program that is in place at our stationary source. 
 
 
 
Process Safety Information 
Yocum Service, Inc. maintains a detailed record of safety information that describes the chemical 
hazards, operating parameters, and equipment designs associated with all processes (Appendix D). 
 
Proce 
ss Hazard Analysis 
Our facility conducts comprehensive studies to ensure that hazards associated with our processes are 
identified and controlled effectively.  Any findings from the hazard analysis are addressed in a 
timely manner. 
 
Operating Procedures 
Yocum Service, Inc. maintains written operating procedures to ensure that activities within our 
covered processes are conducted safely.  These procedures address various modes of operation; the 
information is regularly reviewed and is readily accessible to operators involved in the processes 
(Appendix B). 
 
Training 
Yocum Service, Inc. has a comprehensive training program in place to ensure that employees who 
are operating processes are competent in the operating procedures associated with these processes. 
 
Mechanical Integrity 
Yocum Service, Inc. conducts documented maintenance checks on process equipment to ensure 
proper operation.  Maintenance checks are conducted by qualified personnel with previous training 
in maintenance practices. 
 Examples of process equipment that would receive maintenance checks 
include:  pressure vessels, storage tanks, piping systems, relief and vent systems, emergency 
shutdown systems, controls, and pumps.  Any equipment deficiencies identified by the maintenance 
checks are corrected in a safe and timely manner (Appendix C). 
 
Management of Change 
Written procedures are in place at Yocum Service, Inc. to manage changes in process chemicals, 
technology, equipment, and procedures.  Process operators, maintenance personnel or other 
employees whose job tasks are affected by a modification in process conditions are promptly notified 
of the modification and offered training to deal with it. 
 
Pre-startup Reviews 
Yocum Service, Inc. routinely conducts pre-startup safety reviews related to new processes and 
modifications in established processes.  These reviews are conducted to confirm that construction, 
equipment, and operating and maintenance procedures are suitable for safe startup prior to plac 
ing 
equipment into operation. 
 
Compliance Audits 
Yocum Service, Inc. conducts compliance audits on a regular basis to determine whether the plan's 
provisions, set out under the 40 CFR part 68, are being implemented.  Any non-compliance issue 
discovered during the audit is promptly corrected. 
 
Employee Participation 
Yocum Service, Inc. truly believes that process safety management and accident prevention is a team 
effort.  Company employees are strongly encouraged to express their views concerning accident 
prevention issues and to recommend improvements.  In addition, our employees have access to all 
information created as part of the facility's implementation of the RMP, particularly information 
resulting from process hazard analyses. 
 
 5. Five-year Accident History 
Yocum Service, Inc. has had an excellent record of preventing accidental releases over the last 5 
years.  Due to our stringent release prevention policies, no accidental release has occurred during this 
period. 
 
 6. Emerg 
ency Response Plan 
Yocum Service, Inc. maintains a written emergency response plan to deal with accidental releases 
of hazardous materials.  The plan addresses all aspects of emergency response including first aid and 
medical treatment, evacuations, and notification of local emergency response agencies and the public 
(Appendix A).
Click to return to beginning