SSE MFG., INC. - SABATASSO FOODS, INC. (KY) - Executive Summary

| Accident History | Chemicals | Emergency Response | Registration | Source | Executive Summary |

Schwan's has historically placed a high priority on chemical  
safety. The corporate environmental compliance manager has been  
assigned overall responsibility for chemical safety in general and  
for ammonia refrigeration safety in particular since 1991.  
Schwan's maintains 3 - shift coverage of emergency responders  
trained to the 24-hour technician level at all facilities with  
ammonia refrigeration systems covered by this rule. 
 
The Florence, KY facility manufactures frozen pizza. Anhydrous  
ammonia is used in the refrigeration system at this facility.  
Ammonia is the most efficient and environmentally compatible  
refrigerant available. Although it is toxic at high concentration  
and is an irritating gas, it is not a cumulative metabolic poison,  
does not cause cancer or other dread diseases and does not cause  
lasting environmental damage. The refrigeration system at this  
facility contains about 145,000 pounds of ammonia. 
 
Schwan's calculates ammonia worst case release scenarios u 
sing the  
Model RMP for Ammonia Refrigeration, May 1996. All Schwan's  
manufacturing facilities are located in areas that meet the  
definition of "urban". Schwan's has chosen to calculate worst case  
release poundage for the largest high-pressure receiver in the  
system, filled to full calculated hydraulic capacity. Reduced  
volume for administrative controls was not used, since the  
described scenario would probably occur only as a result of a  
catastrophic vessel rupture caused by a total filling of the  
vessel, closure of all vessel block valves, failure of all  
pressure relief valves, with a simultaneous increase in liquid  
temperature sufficient to overpressure the vessel to the point of  
failure. 
 
It is the professional judgement of Schwans Environmental Health  
and Safety Department that a release rate of 400 lb./min. should  
be used as an alternate case scenario in lieu of the 100 lb./min.  
rate suggested in the Model RMP.  
 
The "urban" site condition will be used. 
 
Based on t 
he above, the worst-case ammonia release scenario for  
the Florence, KY facility will be 42,000 pounds released over a  
10-minute period. The alternate case will be a release rate of 400  
pounds per minute. Both scenarios have off-site impacts. 
 
The ammonia refrigeration system is covered by the OSHA Process  
Safety Management (PSM) rule, 29 CFR 1910.119. 
 
The Florence, KY facility maintains a 3-shift emergency response  
team, trained at the 24-hour technician level. The team numbers 27  
members. The training is conducted by the Corporate Environmental  
Compliance Manager. The training is designed with a heavy emphasis  
on ammonia safety, mechanical isolation, personal protective  
equipment up to use of Level `A' suits and interaction with an  
incident command system (ICS). Copies of emergency plans are filed  
with the Fire Department and annual facility walkthroughs are  
conducted with Fire Officers. Preplanned command posts and staging  
areas have been designated and Incident Command 
transfer and  
liaison functions have been established. A post-incident  
debriefing is conducted after each incident. The Plant is fenced,  
a 24 hour/day, 7 days/week outside security contractor is on-site.  
The facility refrigeration team is on-duty 24 hours/day, 7  
days/week. System inventory is kept at the minimum level  
consistent with maintaining safe operations. Vessel inventory  
levels are maintained as low as possible consistent with safe  
operating practice. 
 
Since a continuous improvement philosophy is deeply imbedded in  
the Schwan's corporate culture, improvements in system safety are  
implemented as a result of employee-based Total Quality Management  
(TQM) teams, a designated PSM team and as a result of system  
engineering modifications and extensions. Post incident  
debriefings and incident investigations are used to identify  
additional improvements to system safety.
Click to return to beginning