New Horizons Supply Cooperative, Patch Grove - Executive Summary

| Accident History | Chemicals | Emergency Response | Registration | Source | Executive Summary |

             Risk Management Plan (RMP) - Propane 
                      Executive Summary 
               New Horizons Supply Cooperative 
                    Patch Grove, Wisconsin 
 
 
 
 1. Accidental Release Prevention and Emergency Response Policies 
We at New Horizons Supply Cooperative in Patch Grove are strongly committed to employee, 
public, and environmental safety.  This commitment is an inherent part of our comprehensive 
accidental release prevention program that covers areas such as design, installation, operating 
procedures, maintenance, and employee training associated with the processes at our facility.  It is 
our policy to implement appropriate controls to prevent possible releases of regulated substances.  
If such a release does occur, our trained emergency response personnel are at hand to control and 
mitigate the effects of the release.  We also coordinate our response effo 
rts with the Patch Grove Fire 
Department, which provides additional emergency response expertise. 
 
 2. Stationary Source and Regulated Substances Handled 
Our facility's primary activities include propane retail distribution and support services for crop 
production.  We have propane  stored in a 30,000-gallon tank located at our facility in Patch Grove 
(Figure 1).  The maximum amount stored is 25,500 gallons (107,686.5 pounds) at the maximum fill 
capacity of 85%. 
 
 3. Worst Case Release and Alternative Release Scenarios 
We utilized RMP PRO for the worst case and alternate case scenarios of the required offsite 
consequence analysis for our facility.  The following details these scenarios. 
 
The worst case release scenario involves a catastrophic release of the entire contents of the propane 
storage tank (107,686.5 pounds) in gaseous form over a 10-minute period.  At Class F atmospheric 
stability and 1.5 m/s wind speed, the maximum distance to an endpoint of 1 psi overpressure is 0.38 
mi 
les (Figure 2).  This amount of overpressure can cause partial demolition of houses and can result 
in serious injury to people within this distance.  The estimated population within a 0.38-mile radius 
of this facility is 300. 
 
The alternative release scenario involves a 30-minute release of propane from a product line that 
contacts an ignition source and detonates, resulting in a vapor cloud explosion.  Under neutral 
weather conditions, the maximum distance to an endpoint of 1 psi overpressure is 0.12 mile (Figure 
3).  The estimated population within a 0.12-mile radius of this facility is 60. 
 
 
 
 
 
    4. General Accidental Release Prevention Program 
Our facility has taken all the necessary steps to comply with the EPA's accidental release prevention 
requirements as set forth in 40 CFR part 68.  The following sections briefly describe the elements 
of the release prevention program that is in place at our stationary source. 
 
Process Safety Information 
New Horizons Supply Cooperative mai 
ntains a detailed record of safety information that describes 
the chemical hazards, operating parameters, and equipment designs associated with all processes 
(Appendix D). 
 
Process Hazard Analysis 
Our facility conducts comprehensive studies to ensure that hazards associated with our processes are 
identified and controlled effectively.  Any findings from the hazard analysis are addressed in a 
timely manner. 
 
Operating Procedures 
New Horizons Supply Cooperative maintains written operating procedures to ensure that activities 
within our covered processes are conducted safely.  These procedures address various modes of 
operation; the information is regularly reviewed and is readily accessible to operators involved in 
the processes (Appendix B). 
 
Training 
New Horizons Supply Cooperative has a comprehensive training program in place to ensure that 
employees who are operating processes are competent in the operating procedures associated with 
these processes. 
 
Mechanical Integrity 
New Horizon 
s Supply Cooperative conducts documented maintenance checks on process equipment 
to ensure proper operation.  Maintenance checks are performed by qualified personnel with previous 
training in maintenance practices.  Examples of process equipment that would receive maintenance 
checks include:  pressure vessels, storage tanks, piping systems, relief and vent systems, emergency 
shutdown systems, controls, and pumps.  Any equipment deficiencies identified by the maintenance 
checks are corrected in a safe and timely manner (Appendix C). 
 
Management of Change 
Written procedures are in place at New Horizons Supply Cooperative to manage changes in process 
chemicals, technology, equipment, and procedures.  Process operators, maintenance personnel or 
other employees whose job tasks are affected by a modification in process conditions are promptly 
notified of the modification and offered training to deal with it. 
 
Pre-startup Reviews 
New Horizons Supply Cooperative routinely conducts pre-startup  
safety reviews related to new 
processes and modifications in established processes.  These reviews are conducted to confirm that 
construction, equipment, and operating and maintenance procedures are suitable for safe startup prior 
to placing equipment into operation. 
 
Compliance Audits 
New Horizons Supply Cooperative conducts compliance audits on a regular basis to determine 
whether the provisions of the plan, as set out under 40 CFR part 68, are being implemented.  Any 
non-compliance issue discovered during the audit is promptly corrected. 
 
Employee Participation 
New Horizons Supply Cooperative truly believes that process safety management and accident 
prevention is a team effort.  Company employees are strongly encouraged to express their views 
concerning accident prevention issues and to recommend improvements.  In addition, our employees 
have access to all information created as part of the facility's implementation of the RMP 
particularly information resulting from process hazard  
analyses. 
 
 5. Five-year Accident History 
New Horizons Supply Cooperative has had an excellent record of preventing accidental releases over 
the last 5 years.  Due to our stringent release prevention policies, no accidental release has occurred 
during this period. 
 
 6. Emergency Response Plan 
New Horizons Supply Cooperative maintains a written emergency response plan to deal with 
accidental releases of hazardous materials.  The plan addresses all aspects of emergency response 
including first aid and medical treatment, evacuations, and notification of local emergency response 
agencies and the public (Appendix A).
Click to return to beginning